Avolites Tiger Touch Manual do Operador

Tiger Touch Operator’s Manual Version 8.0

Page 10 – Reference Manual Contents TitanUniversal_Man_v8-0_TT.doc 05 August 2014 8.1.1 Programming a chase...

Page 100 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6. Shapes and Pixel Mapper effects The Shape Generato

6. Shapes and Pixel Mapper effects - Page 101 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6.1 Creating effects 6.1.1 Creating a shape To crea

Page 102 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Shapes are based on the current settings of the f

6. Shapes and Pixel Mapper effects - Page 103 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Control the speed of the shape using the left

Page 104 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The display above the left hand wheel shows the phas

6. Shapes and Pixel Mapper effects - Page 105 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Select the group of fixtures. 2> From the

Page 106 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Available animations are: • Rotate • Slide • Zoom

6. Shapes and Pixel Mapper effects - Page 107 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 button at the bottom of the screen, you can select ea

Page 108 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6.2 Editing shapes and effects 6.2.1 Editing shapes

6. Shapes and Pixel Mapper effects - Page 109 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6.2.4 Removing or adding fixtures You can add or rem

Reference Manual Contents - Page 11 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.6.12 Fire first cue option ...

Page 110 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6.4 Pixel Mapper examples 6.4.1 Randomising effects

6. Shapes and Pixel Mapper effects - Page 111 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6> Select [Layer 1], click [+] at the bottom of t

Page 112 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9> Select [+] and this time choose Opacity anim

6. Shapes and Pixel Mapper effects - Page 113 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6.4.2 Overlaying effects This example shows you how

Page 114 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Reduce 'Spawn Rate' until only one stripe

6. Shapes and Pixel Mapper effects - Page 115 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 8> Click on [Effect] at the top left to access

Page 116 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Example 1: Odd/Even 1> Select your fixtures. 2>

6. Shapes and Pixel Mapper effects - Page 117 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> Drag a marquee select across the even fixtures

Page 118 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Example 2 - Pseudo random 1> Select your fixtures

6. Shapes and Pixel Mapper effects - Page 119 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> Open the Layout Editor. 3> Select the fixt

Page 12 – Reference Manual Contents TitanUniversal_Man_v8-0_TT.doc 05 August 2014 12.7.3 Software licensing...

Page 120 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Context menu - 'Highlight' When enabled thi

6. Shapes and Pixel Mapper effects - Page 121 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Drag 'In Time' to zero and 'Out Time

Page 122 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 having to manually match the individual values.) 7>

6. Shapes and Pixel Mapper effects - Page 123 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Increase 'Exponent' to around 25%. (This

Page 124 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Fire the white pulse. Notice how the white takes pr

6. Shapes and Pixel Mapper effects - Page 125 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 horizontally. 5> Reduce Y until the bar disappea

Page 126 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Reduce 'In Time' and 'Out Time'

6. Shapes and Pixel Mapper effects - Page 127 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Now you have a vertical bar that draws randomly us

Page 128 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Reduce 'Zoom' so that we can fit lots of b

6. Shapes and Pixel Mapper effects - Page 129 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Increase 'Direction Random' slightly. (T

1. Quick Start - Page 13 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1. Quick Start This section is a quick guide on how to do most things on t

Page 130 – 6. Shapes and Pixel Mapper effects TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9> Click on [Effect] and set 'Pre-Spool'

7. Cues - Page 131 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 7. Cues So you’ve set up a great look on the stage, and you want to save it to

Page 132 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 fixtures is also stored, and is used with shapes and the Fixture Overlap function

7. Cues - Page 133 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • A Static Playbacks workspace is available to show the contents of the macr

Page 134 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Individual playbacks can be set to Blind mode using [Playback Options]. The playb

7. Cues - Page 135 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • You can Flash the cue by pressing the grey flash button. You can Swop (solo)

Page 136 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Click on a playback to instantly kill it. You can also press [Playback Options]

7. Cues - Page 137 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Channels will always release with a fade time, this defaults to 2 seconds but yo

Page 138 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • To test, fire some playbacks, then release them by pressing the Release button

7. Cues - Page 139 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> With the cue fired, select the fixtures and change them to the settings y

Page 14 – 1. Quick Start TitanUniversal_Man_v8-0_TT.doc 05 August 2014 At top menu press [Shapes and Effects], [Shape Generator], [Create]. Select

Page 140 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • The Shapes view shows which attributes of each fixture are running shapes. You

7. Cues - Page 141 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> Press [Quick Include] or [Advanced mode] if you want to change the mode.

Page 142 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 4> Use the softkeys to select which Attributes you want to remove. 5> Pre

7. Cues - Page 143 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> Press the Select button of the cue you want to delete. 3> Press the S

Page 144 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 All times which you have set while programming the fixtures/dimmers will be reco

7. Cues - Page 145 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 7> Press Exit to get out of Edit Times mode. • You can also set independent

Page 146 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 3> Press [Fixture Order]. 4> Set the sequence number to start from using

7. Cues - Page 147 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 When you are in the Set Attribute Times menu you can only select fixtures which

Page 148 – 7. Cues TitanUniversal_Man_v8-0_TT.doc 05 August 2014 When using with chases you need to press [Mask] before pressing the Shutter butto

7. Cues - Page 149 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 the strobe playback, and it will keep going during the strobe and continue smoot

1. Quick Start - Page 15 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 [Fixture Overlap] sets each fixture to fade in sequence (100%=all together

Page 150 – 8. Chases TitanUniversal_Man_v8-0_TT.doc 05 August 2014 8. Chases As well as being used to store static cues, the playback faders can

8. Chases - Page 151 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • You can set a legend for the chase by pressing Set Legend, then pressing th

Page 152 – 8. Chases TitanUniversal_Man_v8-0_TT.doc 05 August 2014 8.2.2 Connecting a chase for control When you fire a chase, the wheels and Sto

8. Chases - Page 153 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> To set the crossfade, press [Xfade] and type the fade from 0 – 100. 0=n

Page 154 – 8. Chases TitanUniversal_Man_v8-0_TT.doc 05 August 2014 8.3 Editing a chase 8.3.1 Opening a chase for editing You can open a chase fo

8. Chases - Page 155 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • To merge the programmer into the live step, double tap [Record Step]. • To

Page 156 – 8. Chases TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Press [Edit Times] from the top level menu then the Swop button of the c

8. Chases - Page 157 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 through its fade. The order of the fixtures is set by the order you selected t

Page 158 – 8. Chases TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Initially all the timing options are set to Global. You can cancel any individu

8. Chases - Page 159 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 8.6.3 Cue linking Option D sets how the cues in the chase are linked. The set

Page 16 – 1. Quick Start TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Switch to System mode by holding Avo and pressing Disk, press [DMX Settings

Page 160 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9. Cue Lists Cue Lists allow you to record a sequence of cues, each of whi

9. Cue Lists - Page 161 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 you have explicitly set, but you do need to make sure you have changed all

Page 162 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.1.2 Changing legends for cues in a cue list You can set a legend for each

9. Cue Lists - Page 163 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The Autoloaded playback will be fired when the cue starts, and killed when

Page 164 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.2 Cue List playback 9.2.1 Running a cue list Raise the fader of the cue

9. Cue Lists - Page 165 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can change this in the Playback Options to make the cue list automatica

Page 166 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • If the View Tracking Values button is selected, tracking values (values w

9. Cue Lists - Page 167 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • To change the times or cue linking for the cue, press [Edit Times], then

Page 168 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6> Press the white ↔ button to jump on to the next step. • You can edi

9. Cue Lists - Page 169 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.3.9 Disabling a cue You can temporarily disable a cue using the Disable

2. Setting up and using the console - Page 17 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2. Setting up and using the console Welcome to the T

Page 170 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 buttons to the right of the Connect button also step through the cues. • Yo

9. Cue Lists - Page 171 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 These options allow you to create complex self timed sequences by building

Page 172 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> All fixtures in the cue will be selected. If you don’t want to change

9. Cue Lists - Page 173 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.5.5 Running a cue list to timecode The console can run a cue list automa

Page 174 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.6 Advanced options Advanced cue list options are set from the Playback

9. Cue Lists - Page 175 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 If you select “Transparent Lock” then the playback will appear on the curre

Page 176 – 9. Cue Lists TitanUniversal_Man_v8-0_TT.doc 05 August 2014 9.6.10 Tracking Tracking mode (where each cue depends on the state of the p

9. Cue Lists - Page 177 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 If the fixture has its intensity above zero or Move In Dark is inhibited wh

Page 178 – 10. Running the show TitanUniversal_Man_v8-0_TT.doc 05 August 2014 10. Running the show So, it’s showtime. This chapter describes the

10. Running the show - Page 179 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 10.1.5 Speed Masters Playbacks can be assigned to a Speed Master w

Page 18 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The main controls The Workspace windows on the touch s

Page 180 – 10. Running the show TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • When a group master is set to disabled or moved to a handle wit

10. Running the show - Page 181 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can switch to different pages for the preset playbacks using a

Page 182 – 10. Running the show TitanUniversal_Man_v8-0_TT.doc 05 August 2014 10.1.12 Blind mode You can set the console to Blind mode by holding

10. Running the show - Page 183 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can use the Off function (see section 7.3.5 on page 141) when p

Page 184 – 10. Running the show TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can also make notes, handy for avoiding bits of paper lying arou

10. Running the show - Page 185 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 10.5.1 Connecting remote trigger sources To connect a MIDI source,

Page 186 – 10. Running the show TitanUniversal_Man_v8-0_TT.doc 05 August 2014 set to On, the console will automatically detect the stimulus. Or yo

10. Running the show - Page 187 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Turn on a playback: note on ($9n pp ll) Note number (pp) = playback

Page 188 – 10. Running the show TitanUniversal_Man_v8-0_TT.doc 05 August 2014 4> Selecting a console will place that console into backup mode

10. Running the show - Page 189 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Pearl Expert you can re-enable DMX output via the shift (Avo) menu.

2. Setting up and using the console - Page 19 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The Playback faders are used to store and play back c

Page 190 – 11. Remote control TitanUniversal_Man_v8-0_TT.doc 05 August 2014 11. Remote control With the addition of an external Wireless Access Po

11. Remote control - Page 191 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • You may experience problems with the remote if you have an intern

Page 192 – 11. Remote control TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Choose what you want to control using the row of buttons across the m

11. Remote control - Page 193 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can then use the Palette screens to control the fixtures, or pre

Page 194 – 11. Remote control TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The wheels show function values (such as colours or gobo names). To g

11. Remote control - Page 195 TitanUniversal_Man_v8-0_TT.doc 05 August 2014

Page 196 – 11. Remote control TitanUniversal_Man_v8-0_TT.doc 05 August 2014

12. User Settings and other options - Page 197 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 12. User Settings and other options The console has

Page 198 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 12.1.3 Saving workspaces You can save different wor

12. User Settings and other options - Page 199 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • To delete a workspace button, press View, Delete,

TitanUniversal_Man_v8-0_TT.doc 05 August 2014

Page 20 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014

Page 200 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Ctrl+Shift+Alt+F2 (1024x768 for external monitor) Ct

12. User Settings and other options - Page 201 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 one of the non-editable system ones, you are prompte

Page 202 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 12.2.2 Selecting a Key Profile A Key Profile is sele

12. User Settings and other options - Page 203 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 always prompt, [Always Merge] - the console will nev

Page 204 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • [Auto Legend…] sets whether new items will automat

12. User Settings and other options - Page 205 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • The software will allow you to configure more tha

Page 206 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 you to set detailed properties such as IP address ran

12. User Settings and other options - Page 207 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 If a show is loaded that had fixtures and lines assi

Page 208 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014

12. User Settings and other options - Page 209 TitanUniversal_Man_v8-0_TT.doc 05 August 2014

2. Setting up and using the console - Page 21 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2.2 Connecting up 2.2.1 Cautions Radio transmitte

Page 210 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 12.6 Upgrading the software The console operating

12. User Settings and other options - Page 211 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 To reinstall the operating system you need a Tiger T

Page 212 – 12. User Settings and other options TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Licensing section of the Avolites website. The licenc

13. Working with Fixture Personalities - Page 213 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 13. Working with Fixture Personalities For each

Page 214 – 13. Working with Fixture Personalities TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Click on the fixture name to open the details in

13. Working with Fixture Personalities - Page 215 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can incorporate your custom personality into

Page 216 – 14. Networking the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014

14. Networking the console - Page 217 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 14. Networking the console There are a number of ways for th

Page 218 – 14. Networking the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 14.1.2 Setting up DMX outputs The console has 64 DMX output l

14. Networking the console - Page 219 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Each device may have one or more nodes(i.e. the Art-Net to

Page 22 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Do not use the power switch on the rear of the consol

Page 220 – 14. Networking the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 A lot of Art-Net devices, including the Net-Lynx box, are set

14. Networking the console - Page 221 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • An unknown device is one which doesn’t format an Art-Net p

Page 222 – 14. Networking the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Close any network windows on both machines. Install and run AC

14. Networking the console - Page 223 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 14.4.1 Example CITP setup This example shows how to set up a

Page 224 – 14. Networking the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 There is a strong possibility that if you set the IP address o

14. Networking the console - Page 225 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 IP Address Subnet Mask Titan console 10.100.100.100 255.

Page 226 – 14. Networking the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014

15. Using different Avolites consoles - Page 227 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 15. Using different Avolites consoles If you are

Page 228 – 15. Using different Avolites consoles TitanUniversal_Man_v8-0_TT.doc 05 August 2014 If you are using a show from a Pearl Expert, anythi

15. Using different Avolites consoles - Page 229 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The Titan software allows multiple timers for cues

2. Setting up and using the console - Page 23 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 outputs on the back of the console, or over an Ethern

Page 230 – 15. Using different Avolites consoles TitanUniversal_Man_v8-0_TT.doc 05 August 2014

16. Release notes - Page 231 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 16. Release notes This section describes changes in the most recent

Page 232 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Simulator and Personality Builder. Please ensure you save and backup yo

16. Release notes - Page 233 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 A new [Handle Worlds] softkey option has been added to the disk menu.

Page 234 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Either method will then set the selected console as the Master and conn

16. Release notes - Page 235 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 mixing fixture, both RGB and CMY are calculated regardless of source a

Page 236 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Filter relevant palettes: There is a new user setting option [Filter Re

16. Release notes - Page 237 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 converting to a cuelist the list will also automatcially connect. Addi

Page 238 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 the local mask. This provides an easy way to set release masks that app

16. Release notes - Page 239 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 visualisation image and apply it directly to a cue or palette legend g

Page 24 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 A 3-pin XLR socket for a desk lamp is provided on the

Page 240 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 sACN merge priority: A new property has been added to the Streaming ACN

16. Release notes - Page 241 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Warning when attempting to assign master to occupied handle: If you at

Page 242 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Preload breaks swop: Fixed issue where preloading a playback would prev

16. Release notes - Page 243 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 No SMPT E tab in timecode workspace: Previously SMPTE was only selecta

Page 244 – 16. Release notes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 already containing dimmers would result in an error claiming the addres

16. Release notes - Page 245 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Set list active page on show load: Fixed an issue where the current pa

Page 246 – 17. Titan Commands quick reference TitanUniversal_Man_v8-0_TT.doc 05 August 2014 17. Titan Commands quick reference Please note that

17. Titan Commands quick reference - Page 247 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 n [.] all sub fixtures of fixture n 1 [THRU] 5 [.]

Page 248 – 17. Titan Commands quick reference TitanUniversal_Man_v8-0_TT.doc 05 August 2014 [Record] [Position] [Cue] [Cue] Merge all but positio

17. Titan Commands quick reference - Page 249 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5sec fade in for attribute connected to wheel B on se

2. Setting up and using the console - Page 25 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Up to 4 windows can be shown on the screen in a 2x2

Page 250 – 18. Glossary of words TitanUniversal_Man_v8-0_TT.doc 05 August 2014 18. Glossary of words ADDRESSES The DMX Channels occupied by in

18. Glossary of words - Page 251 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 DIMMER Device used to control the intensity of an individual ligh

Page 252 – 18. Glossary of words TitanUniversal_Man_v8-0_TT.doc 05 August 2014 example the P(osition) group includes Pan and Tilt attributes. LCD

18. Glossary of words - Page 253 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 PARK A Parked fixture is one which is patched to a handle but has

Page 254 – 18. Glossary of words TitanUniversal_Man_v8-0_TT.doc 05 August 2014 TRACKING Describes the operation of Cue Lists where lighting state

18. Glossary of words - Page 255 TitanUniversal_Man_v8-0_TT.doc 05 August 2014

Page 256 - Index TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Index Softkey Menu items are indicated with capital letters (for example “Activate

18. Glossary of words - Page 257 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 custom/user fixture personalities · 213 D Delay Time · 144 delete

Page 258 - Index TitanUniversal_Man_v8-0_TT.doc 05 August 2014 L latch menu · 28 latching the copy menu · 142 latching the rec cue menu · 131 lay

18. Glossary of words - Page 259 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 releasing · 135 power on state · 136 preset palettes · 49 Prev/Nex

Page 26 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can also press the View button to access the [O

Page 260 - Index TitanUniversal_Man_v8-0_TT.doc 05 August 2014 W warn before parking fixtures · 202 Wheel sensitivity · 202 wheels acceleration ·

18. Glossary of words - Page 261 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Avolites Titan Operator’s Manual (Tig

2. Setting up and using the console - Page 27 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Workspace window options You can change the window si

Page 28 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Touch Keyboard At the right hand end of the toolbar i

2. Setting up and using the console - Page 29 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2.3.2 The menu area of the touch screen The right ha

TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Useful Avolites phone numbers:- Avolites England Sales and service* (+44) (0) 20 8965 8522 Servi

Page 30 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 the roller image a legend shows which attributes are b

2. Setting up and using the console - Page 31 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Control Panel opens a sub-menu allowing changes to mo

Page 32 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2.3.5 Visualiser The console runs Avolites Visualiser

2. Setting up and using the console - Page 33 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Use the Record button in Capture to store palettes on

Page 34 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 To record a macro: 1> Press the Macro button (ab

2. Setting up and using the console - Page 35 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 F11 Gobos/Beams window Alt V Open/View menu F12

Page 36 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 To change or create users, go to the Users menu. 1>

2. Setting up and using the console - Page 37 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2.4.3 Linking to other TitanNet sessions If multiple

Page 38 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Slaves can leave a session using the [Leave Session] b

2. Setting up and using the console - Page 39 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 set up on the Download site, which you should go and

TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Written by Tim Mitchell, Sabre Technology Ltd http://www.sabretechnol

Page 40 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2.6.1 Saving the show You can save your show at any

2. Setting up and using the console - Page 41 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Press the Disk button then [Load Show] to load in a n

Page 42 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can save any number of different shows on the Tige

2. Setting up and using the console - Page 43 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Press the Disk button. 2> Press [Import S

Page 44 – 2. Setting up and using the console TitanUniversal_Man_v8-0_TT.doc 05 August 2014 We recommend that you have autosave enabled while pro

2. Setting up and using the console - Page 45 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Reports can be created in HTML, PDF, CSV or XML form

Page 46 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 3. Patching Patching is the process where you tell the Tiger Touch • What t

3. Patching - Page 47 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 between page buttons and scrolling mode. You can change the fixture page at a

Page 48 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 later. You can also edit the User Number from the Repatch Fixture menu. • You

3. Patching - Page 49 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 3> Select the correct fixture manufacturer from the softkeys ([Previou

Reference Manual Contents - Page 5 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 SECTIONS 1. QUICK START 13 2. SETTING UP AND USING THE CONSOL

Page 50 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 7> Press a Fixture Select button to patch the selected fixture. 8>

3. Patching - Page 51 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • To show the DMX address for fixtures, press View then Patch. To show patch

Page 52 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Fixtures must be equipped with RDM for this to work; many fixtures are not. A

3. Patching - Page 53 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 4> Turn off [Find Fixture] mode and (if not already occupied) patch the f

Page 54 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 fixtures. • You can switch off some of the display columns to make the Patc

3. Patching - Page 55 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Press Patch (if you’re not already in Patch mode). 2> Press [Repat

Page 56 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • You can set the same legend for multiple fixtures by selecting a group of f

3. Patching - Page 57 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The buttons on the left let you select the different output lines from the co

Page 58 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 However, this may not always work out quite right, so using Exchange Mapping y

3. Patching - Page 59 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Where a fixture has been exchanged from more than one source fixture you c

Page 6 – Reference Manual Contents TitanUniversal_Man_v8-0_TT.doc 05 August 2014

Page 60 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • The new personality is loaded from the Titan/Personalities folder. 3.3 Cop

3. Patching - Page 61 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 All programming for the fixture is also deleted. You cannot undo deletion of

Page 62 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • You can change the invert on multiple fixtures by selecting more than o

3. Patching - Page 63 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 3.4.4 Fixture Offset You can set an offset to any attribute of any fixture.

Page 64 – 3. Patching TitanUniversal_Man_v8-0_TT.doc 05 August 2014 3.4.6 Freeze fixtures or attributes This option allows you to freeze individu

4. Controlling dimmers and fixtures - Page 65 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 4. Controlling dimmers and fixtures When you are prog

Page 66 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Once you have changed any attribute, pressing a Sel

4. Controlling dimmers and fixtures - Page 67 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 cues you store. If the option is set to “Clear” then

Page 68 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 programming in future and is currently used to clear v

4. Controlling dimmers and fixtures - Page 69 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Press Unfold then select range of fixtures. The ce

Reference Manual Contents - Page 7 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 CONTENTS 1. Quick Start 13 1.1 Patching fixtures ...

Page 70 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can also select attributes by touching the IPCGBE

4. Controlling dimmers and fixtures - Page 71 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • The wheels operate in an “acceleration” mode.

Page 72 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The rest of the window contains buttons or controls t

4. Controlling dimmers and fixtures - Page 73 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Fixtures which support keystoning or blades/shutter

Page 74 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 (keep pressing Exit until the vertical menu bar shows

4. Controlling dimmers and fixtures - Page 75 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 keypad, when you press Thro, And or @ (functions of t

Page 76 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2> Press the white All button (below the Next Time

4. Controlling dimmers and fixtures - Page 77 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 4.1.12 Attribute groups – IPCGBES-FX To make life a

Page 78 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Select the fixtures/dimmers you want in the gro

4. Controlling dimmers and fixtures - Page 79 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 The fixtures in the group will be shown numbered in t

Page 8 – Reference Manual Contents TitanUniversal_Man_v8-0_TT.doc 05 August 2014 3.3.1 Copying or moving a patched fixture...

Page 80 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • You can use the Fan button to evenly spread fixture

4. Controlling dimmers and fixtures - Page 81 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 accidentally left a fixture out of a cue you can copy

Page 82 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 if you have 12 fixtures across the stage in 3 groups o

4. Controlling dimmers and fixtures - Page 83 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • Pull Ends - The first and last selected fixture ar

Page 84 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 2: 3: 4.1.22 Setting fixture/attribute times Fade

4. Controlling dimmers and fixtures - Page 85 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 Setting a time attribute value will cause the '

Page 86 – 4. Controlling dimmers and fixtures TitanUniversal_Man_v8-0_TT.doc 05 August 2014 You can select fixtures by touching the fixture names

5. Palettes - Page 87 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5. Palettes When programming a show you will find that you frequently use ce

Page 88 – 5. Palettes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 If the Colours, Positions, Gobos & Beams windows are not shown, press View

5. Palettes - Page 89 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 1> Press Clear to clear the programmer. 2> Select the fixtures for

Reference Manual Contents - Page 9 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 6. Shapes and Pixel Mapper effects 100 6.1 Creating effects...

Page 90 – 5. Palettes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 • [Record By…] allows you to control how the mask is used when saving the

5. Palettes - Page 91 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 fixture settings. Pressing the palette button again will automatically merge.

Page 92 – 5. Palettes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5.1.5 Setting legends for palettes You can enter a legend for each palette wh

5. Palettes - Page 93 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5.1.6 Creating an effects palette (shape or pixel mapper) It can be very us

Page 94 – 5. Palettes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5> If you moved the fixtures in step 1, press [Set Mask] and exclude every

5. Palettes - Page 95 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5.2.3 Only showing relevant palettes If the User Setting [Filter Relevant Pa

Page 96 – 5. Palettes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 palette), make the changes you want, then press the [Update Palette x] softkey

5. Palettes - Page 97 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5.4 Copying, moving and deleting palettes 5.4.1 Copying or moving a palette

Page 98 – 5. Palettes TitanUniversal_Man_v8-0_TT.doc 05 August 2014 5.5.1 Palettes with saved times If you have saved time information in a palet

5. Palettes - Page 99 TitanUniversal_Man_v8-0_TT.doc 05 August 2014 type in a different time. This can be useful when “busking” a show with palet